Parallel Dip Bars
You want a bodybuilders work out in order to quickly achieve visible training results? With this parallel dip bars, you have endless possibilities to effectively strengthen your power and endurance.
Parallel dip bars for bar support and much more
Despite its simple construction, this parallel dip bars, is a training tool with a complex effect. You can always rearrange your workout and make quick muscle gains throughout the entire body with a single piece of equipment and thus achieve a particularly harmonious muscle build-up.
Stable construction
The stable training device has two widely spaced feet made of solid quality steel, ensuring excellent stability and optimum training comfort. By mounting the additional red profiles, you give the parallel dip bars a maximum resistance - no vibration and no wobbling will disturb your intense workout. On the contrary: the bar forms a solid foundation for all kinds of exercises on the different bars. The lower crossbars, increase the stability of the bar construction and at the same time create new possibilities for your intense muscle training.
Individually adjustable
Individually adjustable: Thanks to the three-stage height adjustment, the dip bar can be set high in the range from 1,080 to 1,200 millimetres and thus perfectly adapts to your size and the various exercises.
Varied training
Maximum variety: After separating the two side parts by removing the red connecting profiles, you can position the parallel dip bars handles at a different angle to each other. This considerably expands the range of possible exercises.
High quality
The training equipment is well thought out down to the last detail and impresses with its unique quality of workmanship. Solid screw connections, caps for the screws and rubber-covered feet are quality features that make all the difference.
Matching floor protection mats
The gym floor protection mats offer you optimal support during your workout and protect your floor and fitness equipment from annoying slipping and unnecessary noise.
TECHNICAL DETAILS
Dimensions | 910 x 750 x 860 to 1,260 mm |
Profile | 40 x 40 x 1.7 mm |
Height adjustable | in the range from 840 to 920 mm |
Total weight | approx. 15 kg |
Maximum load | 290 kg |
Material | Solid steel frame |
Coating | Powder-coated |
DELIVERY
Scope of delivery | 1 package |
Included | Mounting kit (without tools) |
ASSEMBLY INSTRUCTION
K-Sport UK - Safety instructions
User information:
Please use the product only in its intended manner for home use. Any other use may result in damage to the product or its surroundings. Rebuilding or modifying the product will compromise product safety. Caution: Risk of injury! Please also observe the assembly and safety instructions supplied.
Use:
This training device should only be used by adults! Extreme, incorrect and/or unplanned training can cause damage to health! Always start the training sessions with a low load and increase it evenly and gently during the training. You should warm up sufficiently before training.
Maintenance and care:
Check all parts for damage and tight fit before each use. If necessary, clean the appliance with a damp cloth and mild soap. Wipe with clean water and allow to dry completely before use.
Disposal:
This appliance should NOT be disposed of with household waste. For proper disposal, please contact the public collection points in your community.
DIFFICULTY LEVEL:
P2Hold onto the lower crossbars with a neutral grip, your elbows pointing backward – not outward.
P3Choose the leg position that corresponds to your fitness level:
P3.1Bend your legs and place the soles of your feet on the ground – light variation.
P3.2Extend your legs fully and place the soles of your feet on the ground – moderate variation.
P3.2Extend your legs fully and place your heels on the ground – challenging variation.
A2Ensure that your upper body stays upright and your lower back remains straight during the exercise.
A3Push yourself back up when your upper and lower arms form a right angle.
Muscle Groups: | |
Training Equipment/Accessories: | Parallel Bars |
No, we do not sell individual parts as a matter of principle.
No, you have to do the assembly yourself.
The tools required can be found in the assembly instructions or in the FAQ under the respective products.
No, we do not supply any tools.
All units are powder-coated.
Unless otherwise specified, the units are made of solid steel.
The unit measures 1,018 x 865 x 920 to 1,500 mm.
The unit can be adjusted between 108 cm and 118 cm.
This unit is designed for a maximum of 290 kg.
The two supports can be adjusted from 91.6 cm to 140 cm apart.
Unfortunately, we cannot offer any spare parts. However, if a part has been delivered broken, we will of course replace it.
You need: 2 spanners 17 mm.