Chest Dip Bar - Knee Raise Station Wall Mounted
Previous
Pull Up Dip Bar Combo
Space-saving, solid and multifunctional: with this smart pull up dip bar combo, you can maximise your training possibilities to professionally train the back and shoulder muscles. After turning the device around, you can train the abdominal, arm and chest muscles thoroughly on the bar and thus optimise the overall muscle build-up.
Pull up dip bar combo for wall mounting
This unit was designed for space-saving wall mounting. Choose between two mounting options and use the training device as a dip station or pull-up bar.
As pull up bar
Decide, every day, on what you want to focus on next with your training. Mounted as a pull-up bar, you can do a comprehensive workout of arms, back, shoulders and chest on this device. Thanks to a wall clearance of 60 centimetres, the pull-up bar is also suitable for exercises with a large range of motion.
Or as dip bar
The transformation into a dip bar is very simple and only takes a few minutes: Now you can strengthen other muscle parts of the upper body with dips, bar supports, leg stretches and many other exercises and thus achieve an overall harmonious muscle build-up.
Stable mounting
Solid down to the last detail: Special hooks attached to the wall allow the unit to be attached to the profile or to the pole tube. In both versions, the thick rubber layer ensures maximum shock absorption and stability. Thanks to the high-quality material (corrosion and scratch-resistant, powder-coated quality steel), you will have many years of fun with the pull up dip bar combo on the wall.
Comfortable backrest
A comfortable, removable backrest ensures a comfortable workout and reduces the risk of injury.
Extendable bar handles
Perfect ergonomics: The bar handles are height-adjustable as well as extendable and can be adjusted to the arm length.
Different handle distances
Use the three pairs of bar grips, of the pull-up bar, to train with different grip distances or use the red tube for the classic pull-up grip.
Additional boxing accessories
There's more: An additional clamp offers you the option to securely attach punching bags, punching balls, TRX bands or other fitness accessories to keep your workout varied.
TECHNICAL DATA
- Total weight: ca.12 kg
- Dimensions as pull-up bar: 1.100 x 760 x 560 mm
- Dimensions as dip bar: 1.100 x 755 x 560 to 720 mm
- Maximum load: 150 kg
- Profile: 30 x 30 x 2,2 mm
- 6 handles with distances of 20, 60 and 110 cm
- 10 anti-slip rubber handles
- Height adjustable bar handles
- Punching bag holder load capacity: maximum 80 kg
- Powder coated
- Solid steel frame
ASSEMBLY INSTRUCTION
K-Sport UK - Safety instructions
User information:
Please use the product only in its intended manner for home use. Any other use may result in damage to the product or its surroundings. Rebuilding or modifying the product will compromise product safety. Caution: Risk of injury! Please also observe the assembly and safety instructions supplied.
Use:
This training device should only be used by adults! Extreme, incorrect and/or unplanned training can cause damage to health! Always start the training sessions with a low load and increase it evenly and gently during the training. You should warm up sufficiently before training.
Maintenance and care:
Check all parts for damage and tight fit before each use. If necessary, clean the appliance with a damp cloth and mild soap. Wipe with clean water and allow to dry completely before use.
Disposal:
This appliance should NOT be disposed of with household waste. For proper disposal, please contact the public collection points in your community.
No, we do not sell individual parts as a matter of principle.
No, you have to do the assembly yourself.
The tools required can be found in the assembly instructions or in the FAQ under the respective products.
No, we do not supply any tools.
All units are powder-coated.
Unless otherwise specified, the units are made of solid steel.
The unit has the following dimensions: as a pull-up bar: 1,100 x 760 x 560 mm, as a dip bar: 1,100 x 755 x 560 to 720 mm.
This unit is designed for a maximum of 150 kg.
The suspension hook is designed for a maximum of 80 kg.
The handles are spaced 20, 60 and 110 cm apart at the bottom and 57 cm apart at the top.
The product has a total weight of approx. 12 kg.
Unfortunately, we cannot offer any spare parts. However, if a part has been delivered broken, we will of course replace it.
You need: 1 drill with Ø 12 mm drill bit, 2 spanners 17 mm, 1 spanner 13 mm.
