Lat Pull Station For Weight Bench
Previous
Lat Pulldown Station Wall-Mounted
You don't have much space but still want to effectively increase your strength and endurance at home? Then this pulldown station wall-mounted is just the thing.
Lat Pulldown Station Wall-Mounted : intensive workouts in the smallest of spaces
Not everyone can set up a room as a home gym and yet many bodybuilders want the option of training professionally at home. With the lat pulldown station for wall mounting, you have a wide range of options for a varied workout of your entire upper body.
Compact training device for performance-enhancing strength training
When designing the equipment, special attention was paid to not using up much space. At the same time, the pulldown station for wall mounting should offer all the functionalities that ambitious bodybuilders expect from a cable pulley. The axis of the bar is 70 centimetres from the wall, so you have enough space to train comfortably.
Free choice of weights
The load bar is designed so that you can attach several weights from different manufacturers to adjust the weight precisely to your needs. Thanks to the carabiner, attaching or changing the weights and other items is done in just a few simple steps.
Customisable
Perfectly customisable: You can not only adjust the weights but also the rope length individually and quickly attach or detach the pole to the carabiner.
Safe construction
The rubber buffer keeps the cable pulls and load bar at the right height and also minimises the risk of a weight falling to the ground. Plastic wheels with ball bearings ensure that the cable pull is practically indestructible. You will notice, in a comparison, that most competitor products are equipped with plastic wheels - This causes a drastically shorter durability. K-Sport does not skimp on safety and stability and is therefore the first choice for many satisfied customers.
Suitable accessories
For an even more varied and intensive workout, find your right accessories.
Weights for your training
With the high-quality cast iron weights, you can have the perfect equipment for your intensive strength training.
TECHNICAL DATA
- Dimensions: 660 x 400 x 145 mm
- Profile: 40 x 40 x 2 mm
- Load bar length: 600 mm
- Load bar diameter: 22 mm
- Cable pull bar width: 1.100 mm
- Maximum load: 200 kg
- Plastic coated rope with 4 mm diameter
- Distance from the wall: approx. 220 mm
- Fixing set with 6 sturdy dowels
- Powder coated
- Solid steel frame
ASSEMBLY INSTRUCTION
K-Sport UK - Safety instructions
User information:
Please use the product only in its intended manner for home use. Any other use may result in damage to the product or its surroundings. Rebuilding or modifying the product will compromise product safety. Caution: Risk of injury! Please also observe the assembly and safety instructions supplied.
Use:
This training device should only be used by adults! Extreme, incorrect and/or unplanned training can cause damage to health! Always start the training sessions with a low load and increase it evenly and gently during the training. You should warm up sufficiently before training.
Maintenance and care:
Check all parts for damage and tight fit before each use. If necessary, clean the appliance with a damp cloth and mild soap. Wipe with clean water and allow to dry completely before use.
Disposal:
This appliance should NOT be disposed of with household waste. For proper disposal, please contact the public collection points in your community.
DIFFICULTY LEVEL:
P2Stand with your back to the lat pulldown machine.
P3Grasp the triceps rope above the rounded ends to ensure a firm grip.
P4If you prefer an easier version, kneel on the ground at an appropriate distance.
P5Lean your upper body slightly forward and hold the ends of the triceps rope at ear level on both sides of your head.
A2Hold the contraction for two seconds.
A3Gradually return your upper body to an upright position.
| Muscle Groups: | |
| Training Equipment/Accessories: | Cable Machine Triceps Rope |
No, we do not sell individual parts as a matter of principle.
No, you have to do the assembly yourself.
The tools required can be found in the assembly instructions or in the FAQ under the respective products.
No, we do not supply any tools.
All units are powder-coated.
Unless otherwise specified, the units are made of solid steel.
The unit measures 837 x 400 x 255 mm (cabinet only).
This unit is designed for a maximum of 140 kg.
The cable pull bar has a diameter of 21.3 mm and is 110 cm long.
The load bar has a diameter of 2.2 cm and a length of 60 cm.
The distance from the wall is 83.7 cm.
Unfortunately, we cannot offer any spare parts. However, if a part has been delivered broken, we will of course replace it.
You need: 1 spanner 8 mm, 1 spanner 13 mm, 2 spanners 17 mm, 1 knife, 1 drill with Ø 12 mm drill bit.
